Epilog Fusion Edge
The Fusion Edge laser series takes our highest-quality engraving technology and incorporates it into smaller-format systems which allow customers to get the latest technology in a transportable format. The Fusion Edge machines feature a touch-screen display panel, on-screen artwork positioning with our IRIS™ camera system, and job trace functionality for quick and easy artwork setup.
Benefits of Epilog’s Fusion Edge Laser System
The Fusion Edge laser engraving and cutting machines from Epilog Laser combine our top-of-the-line technology and our latest features in two formats: a compact desktop machine with the Fusion Edge 12, and a larger standalone system with the Fusion Edge 24 – both leveraging over three decades of laser machine design and manufacturing experience to create powerful and truly modern systems.
The Fusion Edge’s 120 IPS (3.05 m/s) engraving speed and 5G acceleration provide the fastest engraving in the industry in a compact format.
IRIS™ Camera Positioning
An overhead camera system provides a real-time picture of the working area for accurate artwork placement. Drag and drop your artwork on screen for the fastest work processing.
Touch Screen at the Laser
Select between jobs, auto focus the laser, and rerun jobs at the touch of a button from the easy-to-use touch screen interface right at the laser.
Engineered and Manufactured in the USA
Proudly designed, engineered, and manufactured in our Golden, CO headquarters at the base of the Rocky Mountains.
Network Your Laser Across Your Business
The Fusion Edge features built-in Ethernet, USB, and Wireless options for networking your laser.
Keep the mechanics of your laser machine cleaner than ever before with side enclosures, a fully covered x-axis assembly, and covered lens assembly
The air assist directs air right at the cutting surface to remove heat and combustible gases from the point of laser contact, providing a cleaner cut.
Radiance™ Beam Enhancing Optics
No additional, expensive lens package needed for the highest resolution engraving across the entire table.
CO2 Waveguide Laser Tubes by Epilog
Metal/ceramic tube design provides higher beam quality and longer life with low recharge costs.
1 GB Memory in the Machine
Improve job management and data integrity with 1GB of RAM. Save your most run jobs right at the laser.
Long-Life Steel Bearing
A dual block design provides the most rigidity and reduced vibration without the inevitable wobble and replacement of plastic bearings.
|Fusion Edge 12||Fusion Edge 24|
|Work Area||24” x 12”
(610 x 305 mm)
|24” x 24”
(610 x 610 mm)
|Maximum Z-Depth||7” (178 mm)||10” (254 mm)|
|Laser Tube Wattage||
CO2 – 30, 40, 50, or 60 watt
– OR –
Fiber – 30 watt
CO2 – 30, 40, 50, 60, or 80 watt
|Software||Epilog Laser Software Suite: Laser Dashboard™ & Epilog Job Manager™|
|Memory||Multiple files, up to 1 GB total. Engrave any file size.|
|Operating Modes||Optimized Raster, Vector, and Combined modes|
|Motion Control||High-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning|
|X-Axis Bearings||Ground & polished stainless steel, Teflon-coated, self-lubricating bearings.
|Belts||Advanced B-style double-wide Kevlar precision drive belts.|
|Resolution||Fully-flexible and user-controlled from 75 – 1200 dpi|
|Speed and Power||120 IPS (3.05m/s) with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode.|
|Print Interface||USB, Wireless, and 10Base-T Ethernet. Windows 7/8/10 compatible.|
|Size (W x D x H)||39.5” x 26.5” x 17.9″
1003 x 673 x 455 mm
|41.52” x 32.81” x 38.04″
1055 x 834 x 967 mm
|Weight||138 lbs (63 kg)||225 lbs (102 kg)|
110 to 240 volts, 50 or 60 Hz, single phase
|Ventilation||350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4″ (102 mm) diameter.|
|Safety||Class 2 Laser Product – 1 mW CW MAXIMUM 600 – 700 nm|
Rim-Style Rotary Attachment
The Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The Fusion Edge rotary attachment is as easy to set up as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.
PhotoLaser Plus Software
PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials.
Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers?
Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.
3-Jaw Chuck Rotary Attachment (Coming Soon)
With the 3-Jaw Chuck rotary, objects are clamped into the device’s 3-jaw chuck, allowing you to rotate cylindrical or oddly-shaped items in applications that demand more precise alignment.
Air Assist Pump
Blows a constant stream of air on the cutting area. Epilog’s optional Air Assist Pump is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.
This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.
Fusion Edge 12 Stand (Coming Soon)
An easy-to-use stand for moving your laser around your workspace, this wheeled cart is specially designed for the Fusion Edge 12 laser machine. It provides you greater versatility within your work environment and the ability to easily transport your machine to different locations.
Note: The Fusion Edge 24 is a standalone machine with a built-in pedestal.
Additional Fusion Edge Lens Options (Coming Soon)
In addition to the 2.0″ lens, we offer special lenses for specific applications.
1.5″ Lens: Highest-Resolution Engraving (Coming Soon)
Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly is designed for the highest-resolution engraving and etching of extremely small fonts.
4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas (Coming Soon)
The 4.0 inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.
|Mother of Pearl||x||x|
|* CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.|
|Do you have a material you would like us to test? Our Applications Team would be happy to assist you.|
Acrylic Jewelry Tree
Mirrored Acrylic Frame
Acrylic Chess Set
iPad Air Engraving
Engraved Lamp Shade
Laser Cut Foam Letters
Custom Pint & Shot Glasses
Stemless Wine Glasses
Laser Etched Mug
Oil & Vinegar Bottles
Stainless Steel Ice Cubes
Stainless Steel Growlers
Engraved Silicon Mug
Customized End Tables
Customized Cutting Boards