BLK 514 CHAI CHEE LANE, #05-01, SINGAPORE 469029

Desktop Series

The Desktop Series combines industrial quality and affordability in an all-aluminum form factor that fits on your desktop.

  • Onyx One Built on the DNA of our Industrial Series and designed from the ground up for quality and reliability, the Onyx One is the desktop 3D plastic printer for professionals.
  • Onyx Pro The Onyx Pro prints composite parts that are 10x the strength of plastic by reinforcing chopped-carbon nylon with continuous strands of fiberglass.
  • Mark 2 The Mark Two is the world's only desktop continuous carbon fiber printer. Print incredibly strong continuous carbon fiber parts.
  • Stronger than Plastic

    The Onyx Pro prints composite parts that are 10x the strength of plastic by reinforcing chopped-carbon nylon with continuous strands of fiberglass.

    Fast & Affordable

    Replace mission-critical machined metal with fiberglass composite parts at 1/20th the cost. These tough parts nail the sweet spot of strength and affordability.

    Upgrade To Carbon Fiber

    When you're ready to build parts that are as strong as aluminum, you can upgrade your Onyx Pro to the Mark Two and get all the benefits of continuous carbon fiber.

    fibermark fusion 3 jaw chuck rotary

    Hardware

    Industrial-grade performance starts with an all-aluminum unibody enclosure built around an ultra flat gantry system. Add a machined aluminum stage with kinematic bed coupling, and a precision ground print platform. The Onyx One desktop 3D plastic printer combines industrial quality with affordability.

    Build Volume :320 mm x 132 mm x 154 mm

    Layer Height :100 μm

    Technology :FFF


    Fusion Standard Rotary Attachment

    Case Study

    Rent the Sky Films prints custom cable adapters for a 15 lb, handheld 3D camera that replaces conventional 100 lb rigs. These adapters consolidate cabling to a single interface point, making the camera simpler and easier to operate. Rent the Sky Films founder Scott Ferril describes this part as “the difference between getting the shots you want vs. the shots you have time for.”




    Fusion 3 Jaw Chuck Rotary Attachment

    Continuous Filament Fabrication

    Formed from the combination of two materials, composite parts are incredibly strong and versatile. Our unique fabrication process enables you to print parts that are an order of magnitude stiffer and stronger than typical 3D printed objects.





    Technical Specifications

    Printer Properties Process Continuous Fiber Reinforced Plastics
    Build Volume 320 x 132 x 154 mm (12.6 x 5.2 x 6 in)
    Weight 16 kg (35 lbs)
    Machine Footprint 584 x 330 x 355 mm (23 x 13 x 14 in)
    Print Bed Flat to within 160 um - Kinematic coupling
    Mark Two Upgrade Carbon Fiber, HSHT, and Kevlar
    Part Properties Layer Height 100um default, 200um maximum
    Ultimate Tensile Strength 590 MPa (19.0x ABS, 16.4x Onyx)
    Max Flexural Stiffness 22 GPa (10.7x ABS, 7.6x Onyx)
    Infill Closed Cell Infill: Multiple geometries available
    SOFTWARE Supplied Software Markforged Software - Cloud Storage, Local Storage, or Fully On-Premise ($5,000 added fee)
    Security Two Factor Auth, Org Admin Access, Single Sign On
    Materials Plastics Available Onyx
    Fibers Available Fiberglass

    Stronger than Plastic

    Print composite parts as strong as aluminum on our top-of-the-line desktop machine. The Mark Two combines Markforged’s unique continuous carbon fiber reinforcement with workhorse reliability for the strongest, most versatile parts. As an industrial 3D printer in a desktop form factor, the Mark Two delivers high-performance parts straight off the print bed.

    High-Strength Printing

    By reinforcing your parts with composite fiber while 3D printing them, The Mark Two achieves unparalleled strength, stiffness and durability in its printed parts.

    Range of Materials

    In addition to printing Onyx, the Mark Two industrial grade 3D printer uses materials that no other 3D desktop printer can, like Carbon Fiber, Fiberglass and Kevlar.

    Easy-To-Use

    We built our own 3D printing software that comes with The Mark Two. Printing a part to be flexible or strong is easy and intuitive.

    fibermark fusion 3 jaw chuck rotary

    Touchscreen Interface

    The Mark Two has a built in touchscreen that makes it easy to connect to wifi, start prints and manage your printer.









    Fusion Standard Rotary Attachment

    Precision Design

    The Mark Two print bed clicks into place with 10 micron accuracy – allowing you to pause a print, remove the bed, add components, click the bed back in and then continue the print in the exact same position.




    Technical Specifications

    Printer Properties Process Continuous Fiber Reinforced Plastics
    Build Volume 320 x 132 x 154 mm (12.6 x 5.2 x 6 in)
    Weight 16 kg (35 lbs)
    Machine Footprint 584 x 330 x 355 mm (23 x 13 x 14 in)
    Print Bed Flat to within 160 um - Kinematic coupling
    Power 100-240VAC, 150W (2A peak)
    Part Properties Layer Height 100um default, 200um maximum
    Ultimate Tensile Strength 700 MPa (22.6x ABS, 19.4x Onyx)
    Max Flexural Stiffness 51 GPa (24.8x ABS, 17.6x Onyx)
    Infill Closed Cell Infill: Multiple geometries available
    SOFTWARE Supplied Software Markforged Software - Cloud Storage, Local Storage, or Fully On-Premise ($5,000 added fee)
    Security Two Factor Auth, Org Admin Access, Single Sign On
    Materials Plastics Available Onyx
    Fibers Available Carbon Fiber, Fiberglass, Kevlar, High Strength/High Temp Fiberglass